Features:
- 1 HP - 115 / 230 Volts - Single Phase Centrifugal Pump
- Self-Priming Design: Once pump is initially primed, filled with water, it will reprime when the water level rises above the end of the suction pipe.
- Easy Servicability:
- Back pullout design allows disassembly of pump for service without disturbing piping.
- Two compartment motor for easy access to motor wiring and replaceable components.
- Diffuser (Guidevane): Bolt down diffuser provides positive alignment with impeller. FDA compliant, injection molded, glass-filled engineered composite for durability and abrasion resistance.
- Corrosion Resistant: Electrocoat paint process is applied inside and out, then baked on
- Impeller: Standard - glass-filled, abrasion resistant engineered composite
- Casing: Cast iron, 4-bolt, back pullout design. Openings for vacuum gauge and casing drain.
- Powered for Continuous Operation: Pump ratings are within the motor manufacturer’s recommended working limits. Can be operated continuously without damage.
- Mechanical Seal: Carbon/ceramic faces, Buna elastomers. 300 series stainless steel metal parts.
- Diaphragm prevents the seal from running dry.
- Maximum water temperature: 140° F (60° C)
- Maximum working pressure: 125 psi
- Approx. 20"L X 9"W X 10" H
- Specifically designed for the following uses: Lawn sprinkling, Heat pumps, Irrigation, Water transfer, Air conditioning systems, Dewatering
- All pumps are tested by manufacturer before shipped to us
- Once pump has been installed it cannot be returned. Any damage due to improper installation is the responsibility of you or your installer. A warranty claim with the manufacturer made be made by the customer but it is up to the discretion of the manufacturer if they will cover any costs associated with an incorrect installation.
