Features:
- 3.5 lb. Dayton pattern single bit axe with 36” curved wooden handle
- Dayton pattern so named for the Dayton, Ohio area
- A full-sized felling axe for general axe chores
- Cutting edge is approximately 4.75” of overall length and the poll is square
- Forged steel head made in USA
- Hand sharpened, tapered bit for cutting and splitting
- ANSI Standards call for bit hardness of Rc 45-60, at least ½ inch back from the cutting edge. Council Tool internal standards call for tempered bit hardness of Rc 48-55 and we target 1-1/4 inches from the cutting edge. The poll and eye walls are not hardened and remain in the as forged condition
- Head coated with red enamel and cutting edges in clear lacquer to deter rust
- 36” curved American hickory handle. Eye section is dried to below 10% moisture content to minimize shrinkage and help prevent loosening
- Axe head is hydraulically seated onto handle and secured with a serrated aluminum wedge
- The serrated shape improves bite and the aluminum choice of material is strong, lightweight and does not change size with moisture content
