Rust-Oleum Peel Coat is a peelable rubber coating that infinite customization for vehicles. This premium formula is easy to peel, safe to wash and can be applied to metal, plastic, chrome, glass and more. The all-weather coating also protects against rust and road debris. Recommended removal within 6 months. Begin removing tape and other masking immediately after the last coat has been applied to keep clean edges. If you wait too long, the coating may adhere too much to the tape. Let Peel Coat set for at least one hour before touching or driving the vehicle, wait at least 24 hours before washing. To peel the coating off, slowly rub along one edge until it begins to peel back and work slowly from the edges. Target 50% coverage on the first coat and apply four or more coats for complete coverage. The more coats, the easier the paint is to remove.
- Vehicles can be washed in automatic car washes
- Hand wash decorative items and allow product to cure 24 hours prior to washing
- Oil based formula that can withstand prolonged exposure to the harsh elements
- Apply as many coats as you would like, the more coats you apply the thicker the coating will be, which will be easier to remove when desired
- Wash vehicles thoroughly and ensure you've removed any wax or grease from the surface
- Cover and mask off any areas that should not be painted with tape, plastic sheeting, etc
- Hold the spray can 8-10 in. from the surface and spray slowly and steadily
- Allow each coat to dry to a finish
- This should take about 5-10 minutes between coats
- Coverage Area: 8 sq ft
- Clean Up: Mineral Spirits
- Indoor or Outdoor: Indoor and Outdoor
- Full Cure Time: 24 hr
- Recommended Surface: Automotive
- Primer Required: No
- Time Before Recoating: 20 min
- UV Resistant: Yes
