The Bosch MRC23EVSK 2.3 HP Electronic Modular Router System is an advanced set-up that provides a fixed base and a plunge base for the MR23EVS router. This system allows for outstanding operator control, with the trigger-control system that has a power switch in both the plunge-base's and the fixed-base's handle. The plunge base's Afterlock microfine bit-depth adjustment at any plunge setting allows for precision, with an adjustable turret stop makes it easy to set any cumulative depth. With a smooth plunge action and a spring-lock plunge lever, this router gets accurate results. The fixed base has microfine bit-depth adjustment, with a continuous depth range of 1-5/8 in., allowing for accurate and fast changes, while its precision-centering design allows the bit to be centered with the sub-base or optional template guides. The router has a 15 Amp motor and adjustable speed settings. The variable-speed dial allows the operator to match the speed to the material. Constant Response circuitry delivers a constant speed throughout the cut. Users can glide along the intended cutline using dovetail fixtures, templates, jigs and other guidance devices.
Specifications:
- Amperage 15.0
- Base Diameter 6" Fixed/ 7" Plunge
- Case Type Hard plastic
- Collet Capacity 1/4", 3/8", 1/2", 8 mm
- Dust Collection No
- Fixed-Base Depth Range 1-5/8"
- Height in 9.5"
- Horsepower Rating 2.3
- Length in 6.75"
- No Load RPM 10,000-25,000
- Plunge Depth 3" (75mm)
- Rating 120V AC
- Subbase Opening 2"
- Variable Speed Yes
- Voltage 120V
- Weight 12.6lb
- Width in 12.6"
- Works With Router Tables - RA1171 Cabinet-Style Router Table, RA1181 Router Table, RA1152 Offset Bit-Change Wrench Set
- Router Guide - RA1054
- Template Guide System - RA1128 Template Guide Set, RA1129 Template Guide Adapter Set
- Centering Device for Subbases and Attached Template Guides - RA1051
- Dust Collection Attachments - RA1175 Edge-forming Dust Hood, RA1177AT Three-Hood Dust Hood Set
Includes:
- Motor, Fixed Base (MRF01)
- Plunge base (MRP01)
- 1/4" Self-Releasing Collet Chuck - 2 610 906 283
- 1/2" Self-Releasing Collet Chuck - 2 610 906 284
- 16mm Shaft Wrench - 2 610 991 388
- 24mm Collet Nut Wrench - 2 610 992 417
- T-Handle Hex Height Adjustment Wrench - 2610923193
- Carrying Case - 2 610 004 484
- Pack of 3 M4 Screws for table mounting - 2610005966
